Suzuki VS 800 GL Intruder 1993 JMT Lithium Ion Battery YTX20CH-FP

Suzuki VS 800 GL Intruder 1993 JMT Lithium Ion Battery YTX20CH-FP

JMT Lithium Ion Battery YTX20CH-FP. Use our advanced search and be sure to find the exact fit.. No product reviews yet. Please be aware that the fitment in the item title is accurate, it is just a case of the compatibility table not being fully updated yet. Lithium-ion batteries by JMT, High-technology for your motorcycle. The latest generation of batteries are identified by the red cover. Batteries may be equipped with one or more spacers that are taped with adhesive tape under the battery so that the battery fits exactly into the original battery box. All batteries are equipped with a battery condition indicator. Simply press the test button. When all three blue LEDs light up the battery is fully charged(ful). If it lights only 2 LEDs, it is only half charged (med). When only one LED is lit (low), the battery must be charged immediately. Replacing a standard lead-acid battery by a JMT lithium-ion battery can save you up to up to 5 kg in weight with minimum effort. JMT lithium-ion batteries have the following benefits. About 1/3 of the weight of comparable lead acid battery. Unbeatable cost/weight ratio savings. Can be mounted in any position – no acid spillage. Does not contain heavy metals. Balanced discharge/charge of all cells by the integral balancer. Fast charging with high amperage systems (up to 90% fully charged in only 6 minutes). Very low self-discharge – long shelf life (up to 5% per month). Excellent performance at high temperatures even up to. Safe technology and high durability. Lead-acid batteries only use 30% of their capacity. Whilst nearly 100% of the capacity of lithium-ion batteries is used. For this reason, lithium versions of JMT batteries need only 1/3 of the capacity of a comparable lead-acid battery for the same starting power. A uniform charging of all the cells is ensured by a built-in processor (the “balancer”). The dimensions of the lithium-ion batteries (using adapters where necessary)correspond to the dimensions of the original lead-acid batteries and the connections are identical, thus the battery can be replaced easily in a few minutes. Please note that only suitable battery chargers should be used, such as the JMP 800, JMP 4000 or the corresponding workshop charger. For fast charging, we recommend the JMP 30000 workshop unit. With this a lithium-ion battery can be charged up to 90% within 6 minutes. For the maximum recommended charging currents please refer to the technical data below. In no case must chargers be use that have a de-sulphate mode for deeply discharged batteries i. E showing 10 volts or less These chargers use an output of more than 14.9 volts before they begin the actual charging cycle. The maximum charging voltage of 14.9 volts must not be exceeded in any case, as in extreme circumstances there can be a danger of explosion. Although this lightweight battery is extremely suitable for everyday use, it should be noted that the starting capacity is reduced at temperatures below zero degrees Celsius. Technology – JMT lithium-ion batteries are manufactured using a cathode material of iron phosphate (LiFePO4) and lithium-polymer. Modern technologies and manufacturing processes ensure the highest safety standards for lithium batteries. 12 V maintenance-free lithium-ion battery. Charging current 3 A recommended. Maximum charging current for fast charging 24 A. Comparable in operation and terminals with. Capacity: 6 Ah (10 Std). Height: 105/122/130/139/147/164 mm (Adjustable with inserts). Weight: 1.193 KG. Terminal Connection: Front from above. Positive Terminal: Front left. Negative Terminal: Front right. Can only send to mainland UK addresses, cannot send to Channel Islands or any other overseas UK territory. Spacer (S) Batteries may be equipped with one or more spacers that are taped with adhesive tape under the battery so that the battery fits exactly into the original battery box. Indicator (I) All batteries are equipped with a battery condition indicator. JMT lithium-ion batteries have the following benefits: – About 1/3 of the weight of comparable lead acid battery – Unbeatable cost/weight ratio savings – Can be mounted in any position – no acid spillage – Does not contain heavy metals – Balanced discharge/charge of all cells by the integral balancer – Fast charging with high amperage systems (up to 90% fully charged in only 6 minutes) – Very low self-discharge – long shelf life (up to 5% per month) – Excellent performance at high temperatures (even up to 60 C) – Safe technology and high durability Lead-acid batteries only use 30% of their capacity whilst nearly 100% of the capacity of lithium-ion batteries is used. IMPORTANT Please note that only suitable battery chargers should be used, such as the JMP 800, JMP 4000 or the corresponding workshop charger. 12 V maintenance-free lithium-ion battery – Charging current 3 A recommended – Maximum charging current for fast charging 24 A Comparable in operation and terminals with: Yuasa Mfr No. YTX16-BS YTX16 BS-1 YTX20CH-BS YB16B-A YB16B-A1. This product has no reviews yet, however see what our buyers say about our other products.. We recommend you do not book your vehicle in for any repairs/MOT until you physically have parts to save on any disappointment caused by delays. Brooks Barn will be under no liability for any costs, damages or expenses caused by any delays. Premium Listings Only – same day dispatch if ordered before 3pm Monday- Friday. For all other orders sent using 24hour courier you will be e-mailed the tracking information to follow your order on-line. A signature will be required. If you wont be home to sign for the item please check the on-line tracking, most couriers will attempt 3 deliveries before returning it, some will take it to a local post office for collection. However, delays are occasionally inevitable due to unforeseen circumstances. We hold trust that our selected Couriers will Deliver Your Parcel Safely. Faulty/Incorrect Item – If the item is faulty/incorrect we will arrange to have the item collected from you free of charge (weekdays only). The item “Suzuki VS 800 GL Intruder 1993 JMT Lithium Ion Battery YTX20CH-FP” is in sale since Thursday, February 21, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Electrical & Ignition Parts\Batteries”. The seller is “brooksbarnparts” and is located in Crymych, Pembrokeshire. This item can be shipped to United Kingdom.
  • Brand: JMT
  • Manufacturer Part Number: HJTX20CH-FP-SI
  • Intended Use: Replacement Part


Andreani Cartucho horquilla ajustable Misano EVO Moto Morini Corsaro 1200 2006

Andreani Cartucho horquilla ajustable Misano EVO Moto Morini Corsaro 1200 2006

“MISANO EVO” FORK CARTRIDGE KIT. The complete cartridge with hydraulic adjustment and spring preload for original fork (OEM), developed by the Andreani Group, is equipped with a sophisticated hydraulic system that ensures the adjustment in compression, extension and preload of the spring, with adjustments placed directly on the upper cap of the cartridge in order to guarantee easy access to the set-up. A made in Italy cartridge. Andreani Group has developed the famous Misano cartridge, appreciated all over the world for its exceptional quality-price ratio. Inside it is formed by a 20mm piston which guarantees a better functioning of the hydraulics. Mounting this kit by Andreani, the improvement at the front end can be seen from the very first laps. Braking is more stable and modular and even the precision and stability in the corners are significantly improved. Comfort and safety are the key words. Andreani offers the possibility to choose the springs for the Misano cartridge according to the rider’s weight and according to the use or the driving style, to have maximum personalization. This guarantees an excellent feeling with the front and the comfort appears decidedly superior. Having a firm front and more stable at the entrance and during cornering, it also increases the driving safety and it is possible to have much more precise trajectories, making more use of the grip between the asphalt and the front tire, obtaining a safe, stable and fast motion. For the correct quantity follow the motorcycle workshop manual? The product is calibrated based on the rider’s weight. For the order it is essential to communicate the weight of the rider. The specifications must be sent when ordering, no changes are considered to be sent later. The item “Andreani Cartucho horquilla ajustable Misano EVO Moto Morini Corsaro 1200 2006″ is in sale since Friday, December 13, 2019. This item is in the category “Motor\ piezas y accesorios\Motos\ recambios\Amortiguadores y suspensiones\Otros”. The seller is “omnia-racing” and is located in 80055. This item can be shipped worldwide.
  • Marca: Andreani
  • Garantía del fabricante: 2 ans
  • MPN: 105/MM3E
  • País/Región de fabricación: Italia


Andreani gabeln cartridge einstellbar Misano EVO Moto Morini Corsaro 1200 2006

Andreani gabeln cartridge einstellbar Misano EVO Moto Morini Corsaro 1200 2006

“MISANO EVO” FORK CARTRIDGE KIT. The complete cartridge with hydraulic adjustment and spring preload for original fork (OEM), developed by the Andreani Group, is equipped with a sophisticated hydraulic system that ensures the adjustment in compression, extension and preload of the spring, with adjustments placed directly on the upper cap of the cartridge in order to guarantee easy access to the set-up. A made in Italy cartridge. Andreani Group has developed the famous Misano cartridge, appreciated all over the world for its exceptional quality-price ratio. Inside it is formed by a 20mm piston which guarantees a better functioning of the hydraulics. Mounting this kit by Andreani, the improvement at the front end can be seen from the very first laps. Braking is more stable and modular and even the precision and stability in the corners are significantly improved. Comfort and safety are the key words. Andreani offers the possibility to choose the springs for the Misano cartridge according to the rider’s weight and according to the use or the driving style, to have maximum personalization. This guarantees an excellent feeling with the front and the comfort appears decidedly superior. Having a firm front and more stable at the entrance and during cornering, it also increases the driving safety and it is possible to have much more precise trajectories, making more use of the grip between the asphalt and the front tire, obtaining a safe, stable and fast motion. For the correct quantity follow the motorcycle workshop manual? The product is calibrated based on the rider’s weight. For the order it is essential to communicate the weight of the rider. The specifications must be sent when ordering, no changes are considered to be sent later. The item “Andreani gabeln cartridge einstellbar Misano EVO Moto Morini Corsaro 1200 2006″ is in sale since Friday, December 13, 2019. This item is in the category “Auto & Motorrad\ Teile\Motorradteile\Dämpfungen & Federungen\Sonstige”. The seller is “omnia-racing” and is located in 80055. This item can be shipped worldwide.
  • Hersteller: Andreani
  • Herstellernummer: 105/MM3E
  • Herstellungsland und -region: Italy


Andreani gabeln cartridge einstellbar Misano EVO Moto Morini Corsaro Avio 2011

Andreani gabeln cartridge einstellbar Misano EVO Moto Morini Corsaro Avio 2011

“MISANO EVO” FORK CARTRIDGE KIT. The complete cartridge with hydraulic adjustment and spring preload for original fork (OEM), developed by the Andreani Group, is equipped with a sophisticated hydraulic system that ensures the adjustment in compression, extension and preload of the spring, with adjustments placed directly on the upper cap of the cartridge in order to guarantee easy access to the set-up. A made in Italy cartridge. Andreani Group has developed the famous Misano cartridge, appreciated all over the world for its exceptional quality-price ratio. Inside it is formed by a 20mm piston which guarantees a better functioning of the hydraulics. Mounting this kit by Andreani, the improvement at the front end can be seen from the very first laps. Braking is more stable and modular and even the precision and stability in the corners are significantly improved. Comfort and safety are the key words. Andreani offers the possibility to choose the springs for the Misano cartridge according to the rider’s weight and according to the use or the driving style, to have maximum personalization. This guarantees an excellent feeling with the front and the comfort appears decidedly superior. Having a firm front and more stable at the entrance and during cornering, it also increases the driving safety and it is possible to have much more precise trajectories, making more use of the grip between the asphalt and the front tire, obtaining a safe, stable and fast motion. For the correct quantity follow the motorcycle workshop manual? The product is calibrated based on the rider’s weight. For the order it is essential to communicate the weight of the rider. The specifications must be sent when ordering, no changes are considered to be sent later. The item “Andreani gabeln cartridge einstellbar Misano EVO Moto Morini Corsaro Avio 2011″ is in sale since Friday, December 13, 2019. This item is in the category “Auto & Motorrad\ Teile\Motorradteile\Dämpfungen & Federungen\Sonstige”. The seller is “omnia-racing” and is located in 80055. This item can be shipped worldwide.
  • Hersteller: Andreani
  • Herstellernummer: 105/MM2E
  • Herstellungsland und -region: Italy


Andreani gabeln cartridge einstellbar Misano EVO Moto Morini Corsaro Avio 2008

Andreani gabeln cartridge einstellbar Misano EVO Moto Morini Corsaro Avio 2008

“MISANO EVO” FORK CARTRIDGE KIT. The complete cartridge with hydraulic adjustment and spring preload for original fork (OEM), developed by the Andreani Group, is equipped with a sophisticated hydraulic system that ensures the adjustment in compression, extension and preload of the spring, with adjustments placed directly on the upper cap of the cartridge in order to guarantee easy access to the set-up. A made in Italy cartridge. Andreani Group has developed the famous Misano cartridge, appreciated all over the world for its exceptional quality-price ratio. Inside it is formed by a 20mm piston which guarantees a better functioning of the hydraulics. Mounting this kit by Andreani, the improvement at the front end can be seen from the very first laps. Braking is more stable and modular and even the precision and stability in the corners are significantly improved. Comfort and safety are the key words. Andreani offers the possibility to choose the springs for the Misano cartridge according to the rider’s weight and according to the use or the driving style, to have maximum personalization. This guarantees an excellent feeling with the front and the comfort appears decidedly superior. Having a firm front and more stable at the entrance and during cornering, it also increases the driving safety and it is possible to have much more precise trajectories, making more use of the grip between the asphalt and the front tire, obtaining a safe, stable and fast motion. For the correct quantity follow the motorcycle workshop manual? The product is calibrated based on the rider’s weight. For the order it is essential to communicate the weight of the rider. The specifications must be sent when ordering, no changes are considered to be sent later. The item “Andreani gabeln cartridge einstellbar Misano EVO Moto Morini Corsaro Avio 2008″ is in sale since Friday, December 13, 2019. This item is in the category “Auto & Motorrad\ Teile\Motorradteile\Dämpfungen & Federungen\Sonstige”. The seller is “omnia-racing” and is located in 80055. This item can be shipped worldwide.
  • Hersteller: Andreani
  • Herstellernummer: 105/MM2E
  • Herstellungsland und -region: Italy


Andreani Cartouche fourche réglable MisanoEVO Moto Morini Corsaro Avio 2011

Andreani Cartouche fourche réglable MisanoEVO Moto Morini Corsaro Avio 2011

“MISANO EVO” FORK CARTRIDGE KIT. The complete cartridge with hydraulic adjustment and spring preload for original fork (OEM), developed by the Andreani Group, is equipped with a sophisticated hydraulic system that ensures the adjustment in compression, extension and preload of the spring, with adjustments placed directly on the upper cap of the cartridge in order to guarantee easy access to the set-up. A made in Italy cartridge. Andreani Group has developed the famous Misano cartridge, appreciated all over the world for its exceptional quality-price ratio. Inside it is formed by a 20mm piston which guarantees a better functioning of the hydraulics. Mounting this kit by Andreani, the improvement at the front end can be seen from the very first laps. Braking is more stable and modular and even the precision and stability in the corners are significantly improved. Comfort and safety are the key words. Andreani offers the possibility to choose the springs for the Misano cartridge according to the rider’s weight and according to the use or the driving style, to have maximum personalization. This guarantees an excellent feeling with the front and the comfort appears decidedly superior. Having a firm front and more stable at the entrance and during cornering, it also increases the driving safety and it is possible to have much more precise trajectories, making more use of the grip between the asphalt and the front tire, obtaining a safe, stable and fast motion. For the correct quantity follow the motorcycle workshop manual? The product is calibrated based on the rider’s weight. For the order it is essential to communicate the weight of the rider. The specifications must be sent when ordering, no changes are considered to be sent later. The item “Andreani Cartouche fourche réglable MisanoEVO Moto Morini Corsaro Avio 2011″ is in sale since Thursday, December 12, 2019. This item is in the category “Auto, moto – pièces, accessoires\Moto\ pièces détachées\Suspension, direction\Autres”. The seller is “omnia-racing” and is located in 80055. This item can be shipped worldwide.
  • Marque: Andreani
  • Garantie fabricant: 2 ans
  • Numéro de pièce fabricant: 105/MM2E
  • Pays de fabrication: Italy


MOTO MORINI Corsaro 1200 ZZ 2017 Metezler Roadtec 01 Tyres 120/70ZR17 190/55ZR17

MOTO MORINI Corsaro 1200 ZZ 2017 Metezler Roadtec 01 Tyres 120/70ZR17 190/55ZR17

Over 70,000 products to choose from. MOTO MORINI Corsaro 1200 ZZ 2017 Metezler Roadtec 01 Tyres 120/70ZR17 190/55ZR17. Metzeler Tyre Pairs Roadtec 01 120/70ZR17 58W – 190/55ZR17 75W. ROADTEC 01 is Metzeler leading product in the sport touring segment, ranging from radial to X-Ply structures, with a focus on enhancing grip on wet and low friction surfaces, an increased mileage and a high degree of adaptability to different motorcycles, riding styles and conditions. Grip on all kind of asphalt. Improved compound solution that enhance chemical grip and adhesive properties in all different situations. Our patented mixing process delivers a more homogeneous compound that emphasizes the chemical properties and results more resistant to the wear process. Fronts feature a full-silica compound, capable of providing excellent chemical grip in conjunction with the mechanical grip created by the groove layout. Radial rears feature a dual-compound layout, where the center stripe covers approximately 20% of the tyre width, with the remaining 80% equally split between the two shoulders. The central stripe has a balanced mixture of silica and carbon-black to enhance high-speed stability, heat dispersal and to provide balance between abrasion resistance and grip. The full-silica compound on the shoulder is similar to that of the front; combined with the tread groove design it delivers excellent grip also on low friction surfaces. The use of a similar compound on front and rear shoulders provides a homogeneous contact feeling into lean. The Cap&Base scheme featuring a thin layer of central compound extending underneath the shoulder compound provides proper heat distribution. All ROADTEC 01 radials are coupled with the Metzeler 0° steel belt Interact technology, contributing both to riding precision and high mileage. ROADTEC 01 X-Ply fronts and rears feature a unique carbon-black based compound with a percentage of silica close to 30% that exploits the heat generated by the structure to reach optimal operating temperature and delivers top grip in the dry. Special resins enhance compound mobility and adhesive properties for incomparable wet grip. Safety on wet and low friction surfaces. On ROADTEC 01, Metzeler developed a new concept of tread design capable to enhance mechanical traction, with a clearly perceivable benefit when accelerating and braking. Front tyre features a large amount of transversal grooves that grip the asphalt as single elements and increase the amount of water drained. Rear tyres feature both long and short grooves with opposed orientation and with different functions. When braking, the short grooves prevent lateral movements and increase motorcycle stability. When accelerating, the long grooves enhance the traction of the compound especially on low friction surfaces. The groove orientation contributes also to increase the mileage: both groove design and pitch have been tuned to leverage on a high land-sea ratio and a high quantity of rubber in contact with the ground. At the same time, the groove orientation, follows the direction of the wear-wave lines, ensuring a regular consumption of the tread and allowing tread design to last until the very end of the tyres life. The shape and layout, besides being a distinguishing feature of ROADTEC 01 tread design, greatly contribute to maximize the level of water drainage and mechanical friction. Mileage and performance consistency. ROADTEC 01 increased the mileage by 10% vs. The innovative profiles generate a short and wide footprint area that reduces compound consumption and increases wear regularity. The ROADTEC 01 contact patch is shorter, wider and has a larger area if compared to that of the ROADTEC Z8 INTERACT that brings two main effects. Reduced slippage of the compound, significantly delaying the rubber wear process. Motorcycle weight and acceleration forces are distributed on a wider surface, reducing compound stress and overheating. The footprint area of ROADTEC 01 includes a higher quantity of grooves and edges contemporarily in contact with the road, enhancing mechanical grip, water drainage and safety feeling; It also ensures more rubber in contact with the ground, especially during mid-lean, allowing a better chemical grip starting from the very beginning of the lean. Stability and trajectory precision. Tailored structures, characterised by adaptive behaviour, regardless of your motorcycle or riding style. The structures of ROADTEC 01 feature more flexible carcasses (compared to ROADTEC Z8 INTERACT) allowing compound deformation to enable mechanical grip, enhance adherence to asphalt asperities and facilitate absorption of road irregularities (patches, bumps, stone paving). Metzeler takes advantage of the whole technological portfolio in different applications to provide the best solution matching product target performance so both radial and X-Ply structures are used, coupled with either bias or 0° steel belts with Interact technology. The structure underneath each size of the ROADTEC 01 range is tuned in construction and material according with the specific need of each fitment. Your item will be professionally & carefully packed and despatched in a timely manner. If you change your mind. If you have simply changed your mind about any item ordered and you wish to return it, then you can do so provided you inform us of your decision within 30 days of receipt. If your items are faulty on arrival, you should inform us as soon as reasonably possible. We are not responsible for the loss or damage of items during their return. Return address M&P Direct Ltd. Phoenix Way, Garngoch Industrial Estate, Gorseinon, Swansea. We’re here to help. Our aim is to enhance your biking experience by making sure that we have the products that you want, when you want them. With some staff having over 25 years experience and a state of the art ordering system we want to give you peace of mind in knowing our aim is to put you on the road and keep you there. The item “MOTO MORINI Corsaro 1200 ZZ 2017 Metezler Roadtec 01 Tyres 120/70ZR17 190/55ZR17″ is in sale since Wednesday, July 10, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Wheels & Tyres\Tyres & Tubes”. The seller is “m_and_p” and is located in Swansea. This item can be shipped to United Kingdom.
  • Brand: Metzeler
  • Manufacturer: Metzeler
  • Manufacturer Part Number: METTP-0006#IEIFVP
  • MPN: METTP-0006#IEIFVP
  • Vehicle Type: Motorcycle
  • Type: Tyres
  • Sub Type: Pair
  • Model/ Series: Type Pairs
  • Size: 120/70ZR17 & 190/55ZR17
  • EAN: Does not apply
  • UPC: Does not apply


Andreani cartuccia forcella regolabile Misano EVO Moto Morini Corsaro Avio 2008

Andreani cartuccia forcella regolabile Misano EVO Moto Morini Corsaro Avio 2008

KIT CARTUCCE FORCELLA “MISANO EVO”. La cartuccia completa con regolazione idraulica e precarico molla per forcella originale (OEM), sviluppata dall’Andreani Group è dotata di un sofisticato sistema idraulico che garantisce la regolazione in compressione, estensione e precarico della molla, con regolazioni poste direttamente sul tappo superiore della cartuccia in modo da garantire un facile accesso al set-up. Una cartuccia Made in Italy. Andreani Group ha sviluppato la famosissima cartuccia Misano, apprezzata in tutto il mondo per il suo rapporto qualità-prezzo eccezionale. Al suo interno è formata da un pistone da 20mm che garantisce un miglior funzionamento dell’idraulica. Montando questo kit di Andreani, il miglioramento all’avantreno si nota dai primissimi giri. La frenata risulta più stabile e modulare ed anche la precisione e la stabilità in curva risultano notevolmente migliorati. Comodità e sicurezza sono le parole chiave. Andreani offre la possibilià di scegliere le molle per la cartuccia Misano in base al peso del pilota e a seconda dell’uso o dello stile di guida, per avere la massima personalizzazione. Ciò garantisce un ottimo feeling con l’anteriore ed il comfort appare decisamente superiore. Avere un anteriore fermo e più stabile in ingresso e in percorrenza di curva, ne aumenta anche la sicurezza di guida ed è possibile così avere traiettorie di percorrenza molto più precise sfruttando maggiormente il grip tra asfalto e pneumatico anteriore ottenendo una moto sicura, stabile e veloce. È necessario per il montaggio l’olio Ohlins per cartucce forcella. Il prodotto viene tarato in base al peso del pilota. Per l’ordine è indispensabile comunicare il peso del pilota. Se non viene specificato il peso pilota il kit viene spedito con taratura standard (70-80 Kg). Le specifiche devono essere inviate al momento dell’ordine, non vengono gestite modifiche inviate successivamente. Dove specificamente indicato – Vedi informazioni sulla restituzione. The item “Andreani cartuccia forcella regolabile Misano EVO Moto Morini Corsaro Avio 2008″ is in sale since Wednesday, December 11, 2019. This item is in the category “Auto e moto\ ricambi e accessori\Moto\ ricambi\Sospensioni\Altro sospensioni”. The seller is “omnia-racing” and is located in 80055. This item can be shipped worldwide.
  • Marca: Andreani
  • MPN: 105/MM2E
  • Paese di Fabbricazione: Italia
  • Garanzia produttore: 2 anni


MOTO MORINI Corsaro 1200 Veloce 1200 2006 Racetec RR K3 Tyre Pairs

MOTO MORINI Corsaro 1200 Veloce 1200 2006 Racetec RR K3 Tyre Pairs

Over 70,000 products to choose from. MOTO MORINI Corsaro 1200 Veloce 1200 2006 Racetec RR K3 Tyre Pairs. Metzeler Tyre Pairs Racetec RR K3 120/70ZR17 58W – 180/55ZR17 73W. Developed to win road races, RACETEC RR delivers maximum performance. Grip in all conditions. Road racing courses feature multiple and variable conditions and RACETEC RR compound specifications have been developed to cope with all of them. The compound recipes of RACETEC RR blend a selection of polymers and resins with different grades of carbon black to maximise hysteresis – even on slippery surfaces. RACETEC RR fronts conform to the micro-granularity of tarmac delivering more grip and wear resistance, to last longer on severe asphalt; the blend of polymers features also high flexibility at lower temperatures. Thanks to RACETEC RR distinctive versatility of use on a wide range of asphalts and temperatures, the front tyre compound choice should be primarly made on rider’s preferences between higher stability and precision when entering the corner (K2 version) rather than predictability and edge grip feeling (K1 version). As for rear tyre, choice of version is based on asphalt friction coefficient (high severity/friction and low severity/friction, depending on the circuit or road race) and asphalt temperature (with the threshold being around 25°/30°degree). The dual-compound cap and base scheme of RACETEC RR rears feature a highly conductive center strip, which supports the shoulder compound from underneath and warms it up during long straights by redistributing the heat generated to the shoulders, maintaining them in the operative temperature and ensuring grip when going into lean. Precision and stability at high speed. RACETEC RR features a composite structure, differentiated between the crown and the sides of the carcass to react properly to different circumstances. Stability is critical in road racing when riding on long straights at full speed (because of aerodynamic interferences) and when the bike passes over drain covers, repair patches or jumps. In both cases stability may be temporarily lost in the rebound following the bike quick lift and drop back down to the asphalt, compressing both tyres and shock absorbers. The crown structure is made with a special rayon fiber. This is characterised by a high rate of linear density and stiffness and is capable of maintaining its shape under a high stress and load strain. The fiber further assists dampen the rebound stroke which absorbs the shock by distributing it through the whole carcass, and dampens the rebound while getting back to the initial shape. The side structure is designed to be stiff, with a low deformation ratio, so to sustain the entire architecture under stress, and to guarantee trajectory precision both on long fast and full lean. Duration and performance consistency. Road races sessions can last up to 240 km. (150 miles), which is more than three times an average track race; durability, integrity and performance consistency are keys to win. All the compounds of RACETEC RR range feature high resistance to abrasion thanks to a homogeneous dispersion of the components in the polymeric matrix obtained through our exclusive and patented continuous mixing process. The tread groove layout minimises the wear and also to disrupt the forces which crease the compound, known as Schallamach’s wear waves. The disruptive angle of RACETEC RR grooves are the result of advanced analyses based on road racing activity. Your item will be professionally & carefully packed and despatched in a timely manner. If you change your mind. If you have simply changed your mind about any item ordered and you wish to return it, then you can do so provided you inform us of your decision within 30 days of receipt. If your items are faulty on arrival, you should inform us as soon as reasonably possible. We are not responsible for the loss or damage of items during their return. Return address M&P Direct Ltd. Phoenix Way, Garngoch Industrial Estate, Gorseinon, Swansea. We’re here to help. Our aim is to enhance your biking experience by making sure that we have the products that you want, when you want them. With some staff having over 25 years experience and a state of the art ordering system we want to give you peace of mind in knowing our aim is to put you on the road and keep you there. The item “MOTO MORINI Corsaro 1200 Veloce 1200 2006 Racetec RR K3 Tyre Pairs” is in sale since Wednesday, July 10, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Wheels & Tyres\Tyres & Tubes”. The seller is “m_and_p” and is located in Swansea. This item can be shipped to United Kingdom.
  • Brand: Metzeler
  • Manufacturer: Metzeler
  • Manufacturer Part Number: METTP-0028#HOHIGW
  • MPN: METTP-0028#HOHIGW
  • Vehicle Type: Motorcycle
  • Type: Tyres
  • Sub Type: Pair
  • Model/ Series: Type Pairs
  • Size: 120/70ZR17 & 180/55ZR17
  • EAN: Does not apply
  • UPC: Does not apply


SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato

Serbatoio Tanica benzina Moto Morini Corsaro 125 con tappo cromato. Cerchi altri ricambi per moto depoca? LEGGERE PRIMA DI ACQUISTARE. INFORMAZIONI SULLOGGETTO IN VENDITA. Loggetto in vendita e tutti gli altri ricambi venduti nel negozio sono RICAMBI ORIGINALI DEPOCA usati e non, rimasti in magazzino per molto tempo e, come tali, potrebbero non essere funzionanti o completi di tutte le sue componenti. Per questo motivo nessuno dei ricambi viene venduto come nuovo, anche se in tali condizioni. Eventuali anomalie estetiche saranno segnalate nelle inserzioni o comunque sempre visibili in foto. Loggetto VIENE SPEDITO ESATTAMENTE COME SI VEDE IN FOTOGRAFIA. Loggetto in vendita NON È STATO TESTATO da un meccanico specializzato e viene venduto con la formula visto e piaciuto come scambio tra privati. Prima di acquistare, CONTROLLATE SEMPRE LA COMPATIBILITA’ delloggetto in vendita col vostro modello, in quanto NON ACCETTIAMO RESI per incompatibilità o per qualsiasi altro motivo. L’INSERZIONE SCADE , di norma, 30 giorni dopo la sua pubblicazione. Possono passare fino a 60 giorni prima che venga ripubblicata. SPEDIZIONE e TEMPI DI CONSEGNA. Di norma il pacco viene preparato e affidato al corriere in tempi molto brevi. I tempi di consegna invece dipendono esclusivamente dal corriere e cambiano in base al metodo di spedizione scelto al momento dellacquisto. TEMPI DI CONSEGNA PER LA SPEDIZIONE IN ITALIA. Posta1: 2-4 giorni lavorativi senza tracciabilità. Posta Raccomandata: 2-4 giorni lavorati con tracciabilità. Pacco Ordinario: 3-4 giorni lavorativi con tracciabilità. Se volete la tracciabilità del pacco, non scegliete Posta1 come metodo di spedizione ma usate Posta Raccomandata o Pacco Ordinario. Al momento della consegna del pacco da parte del corriere, VERIFICATE SEMPRE L’INTEGRITA’ DEL PACCO e, qualora non fosse integro e/o manomesso, contestatelo immediatamente al corriere stesso, in quanto, non siamo responsabili di eventuali danni provocati dal corriere durante la spedizione. Le SPEDIZIONI NON RITIRATE in giacenza non saranno rimborsate. Per altri metodi di pagamento contattaci a. In tempi brevi ti invieremo la fattura con il prezzo delle spese di spedizione corretto in base al peso e alle dimensioni degli oggetti acquistati. Non dimenticarti di lasciare un FEEDBACK POSITIVO dopo la consegna delloggetto acquistato e ne riceverai uno da parte nostra come ottimo acquirente. Lasciare un commento negativo o neutro non risolve eventuali problemi che possono accadere. Siamo sempre disponibili sia prima che dopo acquisto per risolvere eventuali problematiche che possono insorgere. ELENCO MARCHE/MODELLI DI MOTO D’EPOCA TRATTATE. MOTO GUZZI 250 AIRONE. MOTO GUZZI 500 FALCONE ASTORE GTV GTS S V W. BENELLI LEONCINO 125 BENELLI 250. MOTO ISO 125/150 MV AGUSTA 250 ANCILLOTTI 125 LAMBRETTA LAVERDA BIANCHI INNOCENTI DUCATI MIVAL SACHS ecc. Per altre informazioni inviaci un messaggio o scrivi a. The item “SERBATOIO Moto MORINI CORSARO 125 + TAPPO Cromato” is in sale since Tuesday, December 10, 2019. This item is in the category “Auto e moto\ ricambi e accessori\Moto d’epoca\ ricambi\Morini”. The seller is “motoricambistorici” and is located in Reggio Calabria. This item can be shipped worldwide.
  • Categoria: Ciclistica e telaio
  • Marca: Morini
  • Paese di fabbricazione: Italia
  • Moto d’Epoca/Moderne: Ricambi Moto d’Epoca
  • Marche Moto: Morini